Black Widow Darts - Steel Tip
It is an extremely short and slim barrel for its weight level. The billet is then center-ground and shaped with a slightly front-heavy balance for more consistent dartgroupings. After the threads, point cavity and barrel styles are machined, the billet is checked for proper weight. The final stages are three different vapor coatings of titanium carbide and titanium/tantalum nitride. These multi-layered coatings, in black or gold, provide an ultra-hard satin texture for an unparalleled grip.
"Spider Left" Shaft: Four high tensile strength wires are anchored in an aluminum base and covered with heat shrunk rubber to form a firm hold on the flight.
"Laser Point": A rough black oxide coating is applied to the point to increase friction and prevent softly thrown darts from falling out.
Styles: Ringed or knurled models